I'm late getting the boat in the water this year

.
So I de-winterize, checked everything out, battery charged, and go to start. no crank.
Disconnected and cleaned all electrical connectors I could find on the engine and dash - no crank.
Dusted off the engine manual and started troubleshooting.
Checked starter relay - good. Then checked voltage supplied to relay when key in start - voltage went from 0.001 to 0.02v. Definitely not the 12v needed for the relay to work but does indicate something is happening!
Finally hooked up the OBDII to check engine codes but it will not communicate. hmmm not good
Has anybody had engine cranking issues?
