Replaced the fuel filter today, and the inner 3/8" nipple came out with the filter. Tried to get the nipple off but to no evail, and stripped the threads. So after a couple different trips to the hardware store, we found a 3/8" x close brass nipple that seemed to do the trick. Hopefully i won't have problems. Any comments for me here? Will everything be okay, and is there something i can do to prevent this in the future?
The old nipple still stuck in the old filter, seems to be about 1/2" longer than the new one.
Also, ran the boat with fake a lake for a while and when we shut it off the water pump had a few drips of water. It wasn't a lot of water coming out, but enough for me to be concerned. The boat was a little nose low, so maybe it just drained toward the pump, and not out toward the pipes?
Does anybody think i should replace the water pump?
Any help would be appreciated; going to lake powell next month and i don't want any problems.
The boat is a 1999 Epic 22 with 290 hours. It has the original drive belt, and it shows no signs whatsoever of cracking.