Welcome, Guest. Please login or register.
Did you miss your activation email?
May 14, 2025, 02:24:47 am
« previous next »
Pages: [1]

Author Topic: Replacing Starter  (Read 1132 times)

tjjarrell

  • Up and Come-er
  • ***
  • Posts: 16
  • Karma: +0/-0
    • View Profile
    • Email
Replacing Starter
« on: May 24, 2010, 00:12:45 am »
Does the starter for the VT300I specific to the boat or can you get an equivalent starter from a toyota vehicle?  If so can you help me with the details? ???
Logged

2000epic

  • Toyota should pay me
  • *****
  • Posts: 153
  • Karma: +0/-0
  • Buffet for President
    • View Profile
    • Email
Re: Replacing Starter
« Reply #1 on: May 24, 2010, 05:30:34 am »
The consensus here on epicmarine is that our starters are pretty much bulletproof.  I thought mine was bad, pulled it out, and upon testing found out it was not the starter (bad perko switch got me).  And if it is bad,  you might be able to get away with a brush replacement.
Logged
2000 Toyota E22, 3 bag 2 pump 1250# ballast system, Perfect Pass wakeboard pro, Sampson Razor tower,  2003 Silverado SS tow vehicle

ktdust

  • Toyota should pay me
  • *****
  • Posts: 174
  • Karma: +0/-0
    • View Profile
    • Email
Re: Replacing Starter
« Reply #2 on: May 24, 2010, 07:36:13 am »
Take a look under a post titled 'X22 won't start'. I thought I had a problem with the starter last year, but it turned out to be bad contacts in the starter. Contacts will run you about $40 and a weekend of time. It's a pain to get to, but not very expensive if you do the work yourself.
Logged
Pages: [1]
« previous next »